CONVEYORS

They are useful for removing chips form hobbling machines, Gun drilling machines and broaching machines, presses etc. The conveyor can be submerged in oil tanks. These are available in various sizes and configuration.

They are useful where very small gap available in the machines and carries powdered chips in wet and dry conditions. These are available in required lengths.

This type of conveyors are suitable for handling short powdered chips and sludge from the coolant effectively from high chips producing machines like spms etc. Available in width 50 mm to 1500 mm .

These conveyors are very effective for filtration and separating of aluminum, cast iron and steel chips. The upward flow principle adopted gives positive filtration effect and separates sludge on a scrapper conveyor simultaneously. Flow rates available 100LPM to 1000LPM.

Imagine the benefits of a single conveyor carrying all the burrs generated from machines positioned at a row. The outlet or burr accumulation can be directly collected outside the machine shop and there is no trolley movement inside the factory.

This can be used in Burr / Swarf yard to extract the oil / coolant directly from swarfs.

The moment the trolley unloads the swarf in pit, it is carried to the centrifuge filter by a chip conveyor. One can recover a minimum of 2 to 3 barrels of oils / coolant daily.Per shift minimum of 4 to 5 ton capacity of burrs can be treated and in final the volume/space occupying burrs can be baled into bundles.

Hinged belt conveyors convey Curly chips and continuous chips generated in machine operation. The pitch of metal belt depends on the type of conveyor required and width ranges from 150mm to 1500mm.